Loading rate and confining pressure effect on dilatancy,acoustic emission,and failure characteristics of fissured rock with two pre-existing flaws

Investigating the dilatancy, acoustic emission and failure characteristics of fissured rock are significant to ensure their geotechnical stability. In this paper, the uniaxial and triaxial compression experiments with AE monitoring under different loading rates were carried out on fissured rock specimens with the same geometrical distribution of two pre-existing flaws. The dilatancy and AE activity of these specimens were discussed, and the effects of the confining pressure and loading rate on the mechanical parameters and failure characteristics were analyzed. The results show that the exponential strength criterion is more suitable than the Mohr–Coulomb strength criterion to characterize the strength characteristics of fissured rock. The crack evolution and failure characteristics of fissured rock specimens are more complicated than those of intact rock specimens. The failure characteristics of the fissured rock follow the tensile shear coalescence model, crack branching occurs with increasing the loading rate, and the multi-section coalescence model is verified with increasing the confining pressure. The phenomena of stress drop and yield platform usually occur after the dilatancy onset, the specimen does not fail instantaneously, and the propagation and coalescence of cracks cause a sharp increase in the AE signals, circumferential strain, and volumetric strain.     

基于八面体理论的岩石循环加-卸载本构模型及修正

探究岩石的受力特点及破坏特性是研究岩石地下工程安全性的关键,诸多学者都期望能在岩石本构模型的研究上取得突破性进展。在此背景下,提出了一种能够描述循环加-卸载条件下岩石的本构模型。首先,假设岩石的微元强度服从八面体剪应力理论并且微元破坏服从Weibull概率公式,将岩石本构中的损伤变量以及岩石微元强度表达式里包含的损伤因子进行本构变换,得到关于应力、应变等其他表现加-卸载下岩石损伤本构模型的参数,表示出岩石微元强度和损伤变量,再将得到的岩石微元强度和损伤变量代入所提出的岩石本构模型中,并进行等式变换得到一个函数表达式。通过将其与实验数据进行拟合对比分析,得出修正后的拟合参数,将其代入函数式中,得到损伤本构模型的修正式。最后将拟合参数进行必要的敏感性分析,得出各拟合参数的实际物理意义。     

基于饱依丁-汤姆逊模型的软岩损伤蠕变模型

为更加准确地描述深部软岩的蠕变全过程,以饱依丁-汤姆逊模型为基础,将损伤变量引入到蠕变方程中,并构造了可描述加速蠕变阶段的模型元件,通过串联得到了新的蠕变模型。结果表明:该模型能够较好地描述软岩的衰减蠕变、稳态蠕变、加速蠕变阶段。用该模型对泥质页岩的蠕变试验结果进行数据拟合对比,结果显示该模型的拟合曲线与实验曲线基本吻合,拟合度为0.99733,能够很好地反映出软岩蠕变的特性,适合用于描述深部软岩的蠕变行为。     

一种新的岩石非线性黏弹塑性蠕变模型研究

为了克服传统元件组合模型不能描述岩石蠕变过程中非线性特征的缺陷，首先根据加速蠕变阶段的应变和应变率随蠕变时间急剧增大的特点，建立黏塑性应变与蠕变时间的指数函数关系并提出非线性黏塑性体．将该非线性黏塑性体与广义Burgers蠕变模型串联，建立可以描述岩石全蠕变过程的非线性黏弹塑性蠕变模型，根据叠加原理得到一维应力状态下的轴向蠕变方程．然后基于塑性力学理论指出岩石三维蠕变本构方程建立过程中的不足之处，并给出非线性黏弹塑性蠕变模型合理的三维蠕变方程．最后采用不同应力水平下砂岩轴向蠕变试验对模型合理性进行验证，结果表明：拟合曲线与试验曲线吻合度较高，所建蠕变模型能够很好地描述砂岩在不同应力水平下的蠕变变形规律，尤其对加速蠕变阶段的非线性特征描述效果很好，验证了模型的合理性．     

三维非连续变形分析方法碰撞分析及其应用

将具有完备动力学理论的非连续变形分析(DDA)方法应用于块体碰撞研究。基于三维DDA(3D DDA)方法,按时步输出块体碰撞过程速度变化和接触嵌入量,进而得到块体碰撞恢复系数、冲量、冲击力。以此为参考指标,采用斜抛、面-面对心等碰撞模型,验证3D DDA方法模拟块体碰撞的有效性,并将3D DDA方法应用于多米诺骨牌倾倒、滚石边坡成灾及防护等算例分析,探讨了多米诺骨牌倾倒机制、滚石启动及运动行为、滚石灾害防护方案。结果表明:多米诺骨牌间距越大,同一块体被碰撞时间越迟,其最终稳定时间也越迟,与下一块体碰撞的动能越大;滚石运动呈侧向平动及转动三维运动特征,每一次碰撞,均引起动能、轨迹或状态的显著变化;滚石拦挡设施弹簧刚度越大,越先达到最大冲击力,最大冲击力随弹簧刚度的增加而减小;可结合树木阻挡效应,耗散滚石动能,降低滚石飞跃高度,使滚石灾害减轻或控制在防护范围以内。     

Tutorial review on validation of liquid chromatography–mass spectrometry methods: Part I

This is the part I of a tutorial review intending to give an overview of the state of the art of method validation in liquid chromatography mass spectrometry (LC–MS) and discuss specific issues that arise with MS (and MS/MS) detection in LC (as opposed to the “conventional” detectors). The Part I briefly introduces the principles of operation of LC–MS (emphasizing the aspects important from the validation point of view, in particular the ionization process and ionization suppression/enhancement); reviews the main validation guideline documents and discusses in detail the following performance parameters: selectivity/specificity/identity, ruggedness/robustness, limit of detection, limit of quantification, decision limit and detection capability. With every method performance characteristic its essence and terminology are addressed, the current status of treating it is reviewed and recommendations are given, how to determine it, specifically in the case of LC–MS methods.     

考虑底部隆起的浅埋隧道围岩压力计算分析

针对浅埋隧道开挖后底部隆起变形现象,应用极限分析上限法构造了考虑底部隆起变形的围岩压力计算模型,结合线性Mohr-Coulomb准则等推导出极限围岩压力的理论表达式。通过约束条件将围岩压力的计算转化为数学中的最优化问题,编制程序进行了优化计算。将计算结果与工程实测数据及文献计算结果进行了对比,验证了当前方法的可靠性。同时,指出在运用极限分析法处理浅埋隧道围岩压力问题过程中应将隧道底部一同考虑,对隧道底部支护会对整个围岩压力产生影响,有助于隧道结构的整体稳定。研究可以为浅埋隧道的开挖、支护提供一定的理论指导.     

Composition assessment of ferric oxide by accurate peak fitting of the Fe 2p photoemission spectrum

A quantitative study of the surface composition of ferric oxide employing photoemission spectra is presented. It was possible to accurately reproduce the expected composition (Fe_2.00±0.05O₃) by modeling the background as a combination of Shirley‐type (Shirley–Vegh–Salvi–Castle) and slope backgrounds through the active approach. The line‐shape employed to fit apparent peak asymmetries was the double‐Lorentzian. It was possible to resolve a previously unreported satellite located at ~729 eV. Copyright © 2016 John Wiley & Sons, Ltd.     

磷矿及磷肥中氧化钙测定方法改进

为了解决磷矿及磷肥中氧化钙酸溶不完全和消除测定过程中磷酸根、镁、铁等的干扰,对磷矿和磷肥中氧化钙的测定方法进行改进。对不同酸溶解体系选择、酸用量、加热时间、干扰掩蔽实验、pH值等条件进行实验,确定采用10 mL王水、3 mL氢氟酸分解试样,加入2 mL盐酸溶解盐类,加入10 mL糊精和5 mL三乙醇胺溶液掩蔽Mg^2+、Fe^3+、PO4^3-、Al^3+的干扰,无需过滤,在pH≈7时预加EDTA至溶液清亮,再加入KOH调节溶液pH>13,加入适量的钙黄绿素指示剂,用EDTA溶液滴定至绿色荧光消失,测定磷矿和磷肥中氧化钙。实验结果表明,三个磷矿石标准样品和磷肥监控样氧化钙测定的相对标准偏差(RSD,n=11)为0.21%~1.1%。实际磷矿和磷肥样品中氧化钙测定值与国家标准方法测定结果一致。     

各向异性非线性强度条件下的边坡稳定性

解释了土体强度各向异性、非线性的物理本质,结合常规直剪试验、三轴试验结果,在前人工作基础上建立了边坡稳定性分析中强度各向异性、非线性的描述方法,其中特别提出了一个各向异性函数．基于Janbu普遍条分法(GPS),运用SPREADSHEET模板程序,提出了一个能将各向异性、非线性强度准则逐点等效到Mohr-Coulomb直线强度准则处理上的迭代方法,准确方便地获得了非线性强度下的边坡稳定性分析．最后的算例展示了方法的使用过程。